One glove beyond

CSM Glove

An excellent glove due to its outstanding resistance to oxygen, Ozone, UV, heat and chemicals.

It is recommended when working with oxidizing products, concentrated nitric acid, concentrated hydrochloric acid, ammonia, concentrated alkalis and alcohols. The natural softness increases operator comfort.

High performance up to 60 autoclave cycles.

Butyl Glove

Butyl gloves make it possible to handle different types of materials inside isolators in the most critical applications. Butyl offers the highest level of impermeability to water, steam, gases and toxic chemicals. Resists degradation by solvents and oxygenating agents. Excellent resistance to ozone and UV light.

Butyl is very elastic and can maintain its flexibility even at low temperatures.

EPDM Glove

EPDM (Ethylene Propylene Diene Monomer) gloves are designed for use in controlled environments such as laboratories, clean rooms, pharmaceutical manufacturing plants and other places where protection from contamination or hazardous materials is needed.

High performance up to 90 autoclave cycles.

Especially valued for their durability, flexibility and resistance to degradation in critical environments.

Puretek™ in CSM

Ready-to-use sterile gloves
- Triple-packed in ISO 4 cleanroom packaging
- Irradiated with gamma rays at 25 kGy
- Washed with deionized water

Full compliance
- Compliant with FDA regulation 21 CFR 177.2600
- Tested according to ASTM D6978-5 for chemotherapeutic drugs

Excellent performance
- Resistant to hydrogen peroxide and peracetic acid
- High performance up to 60 autoclave cycles

Puretek™ in EPDM

Ready-to-use sterile gloves
- Packaged in triple layer in ISO 4 cleanroom
- Irradiated with gamma rays at 25 kGy
- Washed with deionized water

Full compliance
- Compliant with FDA regulation 21 CFR 177.2600
- Tested according to ASTM D6978-5 for chemotherapeutic drugs

Excellent performance
- Resistant to hydrogen peroxide and peracetic acid
- High performance up to 90 autoclave cycles

CSM short glove

The short CSM glove is available in the length of 350 mm. CSM sleeves are available for connection to theisolator.

Butile Short Glove

The short Butile glove is available in the length of 350 mm. Butile sleeves available for connection to theisolator.

EPDM Short Glove

Butyl short glove is available in the length of 350 mm. EPDM sleeves are available for connection to theisolator.

Sleeve with edging on one side

Hoses with edging on one side are available in Butyl, Neoprene, CSM and EPDM, in lengths 620-630 mm.

Latex free, TSE/TBE free and Thiuram free.

Sleeve with edging on two sides

Two-sided edged hoses are available in Butyl, Neoprene, CSM and EPDM, in lengths 580-590 mm.

Latex free, TSE/TBE free and Thiuram free.